ARMORFLO 200 is a self smoothening underlayment for medium to heavy duty industrial flooring installations applications such as warehouse, factory and industrial floors requiring durability and strength. It is designed for easy application on concrete floors over concrete floors as an underlayment for subsequent placement of floor coverings.
ARMORFLO 200 can be used for smoothening underlayment of the following areas:
- Industrial floor and warehouse
- Self leveling of interior and exterior areas before floor coverings
- Leveling of wood subfloors
ADVANTAGES AND BENEFITS
- Aesthetically nice self leveling and smooth finish
- Fast setting, can be worked on within 3 to four hours , depending on the temperature
- Excellent workability, can be poured or pumped
- Minimal shrinkage and outstanding resistance to crack
- Excellent bond strength
- High abrasion resistance
- Available in multiple colours
Prepare concrete substrate in accordance with International Concrete Repair Institute (ICRI) Technical Guideline. Remove all unsound concrete and provide a profiled, porous surface. Substrate must be structurally sound, dust-free, and free of grease, oil, dirt, curing compounds, release agents, or any other surface or penetrated contaminants that will adversely affect bond. Pressure wash the surface with a commercial pressure washer (3000 psi, 4 GPM) (21MPa, 0.25 L/s) and allow to fully dry before application.
PRIMING: Apply one coat of ARMORPRIME 400 acrylic primer to allow for good bonding and adhesive purpose, for a very porous concrete surface ensure that two coat of primer is applied to ensure surface is well saturated with the primer before application.
MIXING : Pour 3.3 to 3.8 litres of water into a clean plastic or metal bucket , pour 70% of ARMORFLO 200 into the clean bucket of water, then mix with a power mixer at 400 RPM, after two minutes of mixing pour the rest of the material and mix until full homogeneity is achieved
APPLICATION AND INSTALLATION
Pour the material on the area to be resurfaced using a hand trowel or spray gun ,because of the self leveling property of ARMORFLO 200 the material can easily be finished as desired, using either a trowel or a broom. The level of thickness will also be determined by the application need, but should be achieved in one application; the mixed material can be applied at a thickness between 3mm and 20 mm. If the mix hardens, it should be disposed, please do not attempt to remix or add water to hardened mix.