ARMORTOP 300 HD – is a liquid ready to use concrete floor densifier, hardener and dustproofer.It is odourless and VOC compliant. When applied ARMORTOP 300 HD penetrates into the concrete surface, starting a chemical reaction that fills in the pores of the concrete, producing a substantially densier concrete with improved durability and improved dust proofing properties.
ARMORTOP 300 HD is recommended for use in old and new concrete, where chemical resistant, dustproofed and improved abrasion resistant surfaces are required such as :
- Factory and industrial floor areas
- Warehouses and storage Silos
- Car parks and packing structures
- Food processing plants
- Gas and Petrol Stations
- Airports and Stadiums etc
ADVANTAGES AND BENEFITS
- Provides improved chemical and abrasion resistance
- Dustproofs and colourless.
- Penetrates deeply into concrete thereby densifying and preventing of harmful chemicals.
- It is ready to use and easy to apply.
- Provides anti scrath surface that wont discolour
- VOC compliant
DIRECTION FOR USE:
Surface Preparations: The surface must be clean, free from loose particles, laitance, grease, wax, dirts and all foreign materials before application % by weight of cement. Consult with ARMORSIL’s Technical Department for assistance in verifying the appropriate dosage rate and for further information regarding enhanced chemical resistance and optimum concrete performance for your project.
Application: Material must be stired well before application. Apply directly in undiluted form to the concrete in ratio of 5-6 quare metre per litre. Note that consumption also depend on surface porosity. Material can be applied with sprayer, squeegee or broom. Ensure all concrete surfaces are saturated for about 30- 60 mins with Armortop. In hot weather surfaces may need to be continuous saturated to prevent evaporation before penetration.
In order to ensure that material penetrates deeply and quickly ARMORTOP 300 HD can be worked into the concrete with a broom or mechanical scrubber
Curing: After application, wait till surface becomes gelly or slippery, thoroughly flush the surface with water and scrub with brooms. Failure to properly saturate with water and remove the excesses may lead to unsightly white patches, this will not though affect the performance.
SETTING TIME AND STRENGTH
ARMORTOP 300 HD dries fast; it usually cures within two to 12 hours depending on the weather and climatic conditions