Enter your keyword

ARMORPATCH 200

ARMORPATCH 200

ARMORPATCH is a water repellent, corrosion inhibiting, polymer modified shrinkage compensated, fiber reinforced, rapid setting, high strength mortar specially formulated for structural concrete repairs in vertical and horizontal surfaces. ARMORPATCH 100 has impressive water repellent and waterproofing properties and therefore suitable for areas requiring waterproofing protection.

In Stock . , .
PRODUCT DESCRIPTION

ARMORPATCH 200  is a two component, water resistant corrosion inhibiting, polymer modified shrinkage compensated, rapid setting, high strength mortar specially formulated for structural concrete repairs in vertical and horizontal surfaces. ARMORPATCH 200 has impressive water repellent and waterproofing properties and therefore suitable for areas requiring waterproofing.

TYPICAL APPLICATIONS

ARMORPATCH 200 can be used for all structural concrete repairs such as:

  • Interior and exterior concrete surfaces
  • Repair of horizontal and vertical surfaces
  • Repair concrete sidewalks,  concrete  spalling
  • Parking lots and bridge decks
  • Fast setting and curing, can be put to use in few hours ( depending on temperature)
  • Industrial floors

ADVANTAGES AND BENEFITS

  • Water repellent and waterproof
  • A Recommended for areas requiring moisture remediation
  • Aesthetically nice self leveling and smooth finish
  • Fiber reinforced to eliminate crack and increase strength
  • Good corrosion Inhibition property, therefore protect reinforcements
  • Minimal shrinkage and outstanding resistance to crack
  • Excellent bond strength
  • High abrasion resistance

SURFACE PREPARATION

Prepare concrete substrate in accordance with International Concrete Repair Institute (ICRI) Technical Guideline. Remove all unsound concrete and provide a profiled, porous surface. Substrate must be structurally sound, dust-free, and free of grease, oil, dirt, curing compounds, release agents, or any other surface or penetrated contaminants that will adversely affect bond. Pressure wash the surface with a commercial pressure washer (3000 psi, 4 GPM) (21MPa,  0.25 L/s) and allow to fully dry before application

PRIMING:  in most instances  priming will not be needed but for vertical surfaces and very porous concrete Apply one coat of ARMORPRIME 400  acrylic primer  to allow for good bonding and adhesive purpose.

APPLICATION INSTRUCTION

MIXING :  Pour 3.3 to 3.8 litres of water into a clean plastic or metal bucket , pour 70% of ARMORPATCH 200  into the clean bucket of water, then mix with a power mixer at 400 RPM, after two minutes of mixing pour the rest of the material and mix until full homogeneity is achieved

To inquire about this product, fill the form below and we will get back to you within 24 hours business day.

Reviews

There are no reviews yet.

Be the first to review “ARMORPATCH 200”

Your email address will not be published. Required fields are marked *